LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Window Weatherstrip Run Channel Assembly - Front
    GM691011Courtesy of GENERAL MOTORS CORP.
  1. Install the weatherstrip/run channel to the door.
  2. Position the tabs on the weatherstrip/run channel into the slots in the door.
  3. Press the weatherstrip/run channel into the window frame opening.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the 2 retaining bolts.

    Tighten:  Tighten the retaining bolts to 10 N.m (88 lb in).

  5. Install the outside rearview mirror. Refer to Mirror Replacement .
  6. Install the window. Refer to Window Replacement - Front Door .
  7. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  8. Install the speaker. Refer to Speaker Replacement - Front Door in Entertainment.
  9. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
scientia non olet · About LEMON Manuals