Passenger Presence System Programming and Setup: Introduction
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
The passenger presence system (PPS) is a calibrated system that requires rezeroing when the system has been serviced or replaced. The procedures below are designed to assist in the rezeroing of the PPS. Before you start, read these procedures carefully and completely. For further information regarding the PPS, refer to SIR System Description and Operation .
IMPORTANT:
The following procedures must be followed:
- Read this procedure carefully and completely.
- The PPS will not function properly if the PPS rezeroing procedure is not performed.
- Perform the Diagnostic System Check - Vehicle in Vehicle DTC Information, after successfully completing the rezeroing procedure to ensure the system is functioning properly.