LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1742 (Engine Control System - 4.2L - Introduction) >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Accelerator Pedal Position Sensor
    GM742494Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor (2) to vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the APP sensor retaining fasteners (1).

    Tighten:  Tighten the retaining fasteners to 10 N.m (89 lb in).

  3. Connect the APP sensor electrical connector.
scientia non olet · About LEMON Manuals