Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel level sensor (3).
- Install the sensor retaining clip.
- Connect the electrical connector to the fuel level sensor.
- Install the retaining clip to the fuel level sensor electrical connector.
- Connect the fuel pump electrical connector.
- Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .