Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
- Disconnect the fuel pump electrical connector.
- Remove the retaining clip from the fuel level sensor connector.
- Disconnect the electrical connector from under the fuel sender cover.
- Remove the sensor retaining clip.
- Squeeze the locking tangs and remove the fuel level sensor (3).