Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Fuel Injector ID Number

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: When ordering new fuel injectors, you must order the correct injector for the application being serviced.

The fuel injector (1) is stamped with a identification part number (2). A 4-digit build date code (3) indicates the month (4), day (5), year (6), and the shift (7) that built the injector.

Fig 2: View Of Fuel Injector, Clip & O-Rings

Courtesy of GENERAL MOTORS CORP.

Lubricate the NEW injector O-ring seals (2 and 4) with clean engine oil.
Install the NEW injector O-ring seals (2 and 4) onto the injector (3).
Install a NEW retainer clip (1) on the injector (3).

Fig 3: Identifying Fuel Rail, Injectors & Components

Courtesy of GENERAL MOTORS CORP.

Push the fuel injector into the fuel rail injector socket with the electrical connector facing outward. The retainer clip locks on to a flange on the fuel rail injector socket.
Install the fuel rail. Refer to Fuel Rail Assembly Replacement .