Ignition Timing
CAUTION:
Timing light connections should be made using proper adapters. Do not puncture cables, boots or nipples with test probes.
Connect a suitable timing light to number 1 cylinder. With engine at normal operating temperature, adjust to specified curb idle RPM. Disconnect and plug vacuum hose at vacuum transducer. Check timing through access hole in clutch housing on 1.7L and 2.2L engines, or in timing plate on 2.6L engines.
Ignition Timing Specifications
| Application | Degrees (BTDC) | ||
|---|---|---|---|
| 1.7L | (1)12 | ||
| 2.2L | 12 | ||
| 2.6L | 7 | ||
|
|||