LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1985 >> Conquest 2.6 N >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> ECI CEC System >> ECI Inspection Test >> Resistor Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Resistor Test

  1. Disconnect electrical connector from resistor. Measure resistance across terminals "1" and "2", then "1" and "3". If resistance is about 6 ohms, resistor is good.
  2. If resistance measures 0 or abnormally large, resistor has short or open circuit. Replace resistor.
Fig 1: EFI Control Relay Terminal Positions
G42221
scientia non olet · About LEMON Manuals