LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 2000 >> Prowler >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Air Bag Restraint Systems >> Service Procedures >> Handling Air Bag Module >> Maintenance Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Maintenance Inspection

  1. Ensure both front impact sensors are properly installed to brackets on frame with 3 fasteners each. Ensure electrical connectors are securely fastened.
  2. Repair as necessary. Check Air Bag warning lamp for proper operation as follows:
    • Turn ignition switch to ON position, Air Bag warning lamp should light. If not, test system using a scan tool and appropriate Passive Restraint System Diagnostic Procedures. Repair as required.
    • The Air Bag warning lamp lights, but fails to go out after eight seconds. Test system using a scan tool and appropriate Passive Restraint System Diagnostic Procedures. Repair as required.
    • After correcting active malfunction, erase stored DTC's.