Alignment Specifications
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1986 Pontiac Grand Prix, 1986 Pontiac Bonneville, 1986 Oldsmobile Cutlass, 1986 GMC Caballero, and 1986 Chevrolet Monte Carlo. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (REGAL)
| Application |
Specification |
| Caster (Degrees) |
+ 3 +/- 1 |
| Camber (Degrees) |
+ .5 +/- .8 |
| Toe-in |
+ .15° +/- .1° |
| Toe-Out on Turns (Degrees) |
| Inner |
N/A |
| Outer |
N/A |
WHEEL ALIGNMENT SPECS (CABALLERO, EL CAMINO, MONTE CARLO)
| Application |
Specification |
| Caster (Degrees) |
Man. St. + 1 +/- 1 |
| **************** |
Pw. St. + 3 +/- 1 |
| Camber (Degrees) |
+ 1/2 +/- 8/10 |
| Toe-in (Inches) |
+ 1/8 +/- 1/16 |
| Toe-Out on Turns (Degrees) |
| Inner |
N/A |
| Outer |
N/A |
WHEEL ALIGNMENT SPECIFICATIONS (CUTLASS)
| Application |
Specification |
| Caster (Degrees) |
+ 2.8 +/- 1 |
| Camber (Degrees) |
+ .8 +/- .8 |
| Toe-in (Inches) |
.15° +/- .1° |
| Toe-Out on Turns (Degrees) |
| Inner |
N/A |
| Outer |
N/A |
WHEEL ALIGNMENT SPECIFICATIONS (BONNEVILLE, GRAND PRIX)
| Application |
Specification |
| Caster (Degrees) |
Man St. + .8 +/- 1 |
| **************** |
Pw. St. + 2.8 +/- 1 |
| Camber (Degrees) |
+ .5 +/- .8 |
| Toe-in (Degrees) |
+ .15° +/- .1° |
| Toe-Out on Turns (Degrees) |
| Inner |
N/A |
| Outer |
N/A |