Without Air Conditioning

Heater Control Mounting:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Instrument Panel (I/P) trim plate.
3. Temperature control cable from heater module. (Use a 7mm socket to push the retaining "fingers" on the module arm together to allow for easy release of cable end.)
4. Control assembly - pull control assembly away from the I/P.
5. Electrical and vacuum connections.
6. Temperature control cable from heater control.

INSTALL OR CONNECT
1. Temperature control cable to heater control.
2. Electrical and vacuum connections.
3. Control assembly to I/P.
4. Temperature control cable to heater module.
5. I/P trim plate.
6. Negative battery cable.