Keyless Entry Transmitter Trunk Lid Release Function

Inoperative

1) Disconnect transaxle range switch connector. Connect test light between transaxle range switch connector terminal "D" (Orange wire) and ground. If test light does not light, check Orange wire for an open circuit.

2) If test light lights, disconnect keyless entry receiver connector. Connect test light between keyless entry receiver connector terminal "D" (Light Green/Black wire) and ground. If test light does not light, check Light Green/Black wire for an open circuit. If wiring is okay, replace transaxle range switch.

3) If test light lights, check Black/White wire at keyless entry receiver terminal "H" for an open circuit. If wiring is okay, program a known good transmitter. If trunk lid release now operates, replace keyless entry transmitter. If trunk lid release does not operate, replace keyless entry receiver.