Determining BCM Programmed Key Code
To determine unknown BCM key code, PASS-Key II(R) Interrogator (J 35628-A) and following procedure.
- Connect PASS-Key II(R) Interrogator (J 35628-A) wiring to PASS-KEY II(R) dash connector at base of steering column. DO NOT connect to steering column wiring.
- Turn on PASS-Key II(R) Interrogator (J 35628-A) and move key code switch to "1" and attempt to start engine. If engine starts, key code is "1". If engine does not start, turn ignition off and press 4-minute timer on PASS-Key II(R) Interrogator (J 35628-A).
- When timer indicator light goes out, move key code switch to next number and attempt to start engine. If engine does not start, continue trying different key codes until proper key code is found. See PASS-Key II(R) KEY RESISTANCE table.
PASS-Key II(R) KEY RESISTANCE
| Key Code No. | Nominal Resistance (Ohms) | Acceptable Range (Ohms) |
|---|---|---|
| 1 | 402 | 386-438 |
| 2 | 523 | 502-564 |
| 3 | 681 | 654-728 |
| 4 | 887 | 852-942 |
| 5 | 1130 | 1085-1195 |
| 6 | 1470 | 1411-1549 |
| 7 | 1870 | 1795-1965 |
| 8 | 2370 | 2275-2485 |
| 9 | 3010 | 2890-3150 |
| 10 | 3740 | 3590-3910 |
| 11 | 4750 | 4650-4960 |
| 12 | 6040 | 5798-6302 |
| 13 | 7500 | 7200-7820 |
| 14 | 9530 | 9149-9931 |
| 15 | 11,800 | 11,328-12,292 |