System Testing: Notes
CAUTION:
HDM contains solid-state circuitry. DO NOT apply voltage (ohmmeter or other source) to HDM internal circuits.
CAUTION:
DO NOT plug in headlight doors module unless battery is connected and headlight switch is in OFF position.
NOTE:
Headlight doors may be opened and closed manually by rotating knob on headlight door motor.
CAUTION:
To prevent damage to terminals, Connector Test Adaptor Kit (J-35616-A) must be used whenever a diagnostic procedure requires checking or probing terminals. To locate and identify terminals, see WIRING DIAGRAMS
.
NOTE:
Before performing tests, check headlight system operation. If headlights do not operate properly, locate and repair problem in headlight system. See WIRING DIAGRAMS
.