Specifications Index
CAMERO, FIREBIRD SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | NA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | SERPENTINE BELT ROUTING & ALIGNMENT -- CARS | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 18 psi | ||
| Thermostat R & I | |||
| 3.8L | NA | ||
| 5.7L | NA | ||
| Water Pump R & I | |||
| 3.8L | WATER PUMP | ||
| 5.7L | WATER PUMP | ||
| Engine Mechanical | |||
| 3.8L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure (with 5W-30 or 10W-30 engine oil) should be 60 psi (4.2 kg/cm2 ) at 1850 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 5.7L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | With engine at normal operating temperature, oil pressure should be at least 6 psi (0.4 kg/cm2 ) at 1000 RPM, 18 psi (1.3 kg/cm2 ) at 2000 RPM and 24 psi (1.7 kg/cm2 ) at 4000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| 3.8L | |||
| Step 1 | 11 Ft. Lbs. (15 N.m) | ||
| Step 2 | Additional 50 Degrees | ||
| 5.7L | |||
| Step 1 | 15 Ft. Lbs. (20 N.m) | ||
| Step 2 | 37 Ft. Lbs. (50 N.m) | ||
| Step 3 | 74 Ft. Lbs. (100 N.m) | ||
| Fuel System | |||
| Pressure Specification | |||
| 3.8L | 48-55 psi (3.4-3.9 kg/cm2 ) | ||
| 5.7L | 55-60 psi (3.9-4.2 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST (EXCEPT SATURN) | ||
| Fuel Filter Location and R & I | |||
| 3.8L | REMOVAL PROCEDURE (CAMARO, FIREBIRD) (3.8L) | ||
| 5.7L | REMOVAL PROCEDURE (CAMARO, FIREBIRD) (5.7L) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | NA | ||
| Spark Plug | |||
| 3.8L | |||
| Type | AC 41-921 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 20 Ft. Lbs. (27 N.m) | ||
| 5.7L | |||
| Type | AC 41-931 | ||
| Gap | Iridium .040 in. (1.04 mm) Platinum .060 in. (1.52 mm) |
||
| Torque | Tighten to 15 ft. lbs. (20 N.m) when using NEW cylinder head. Tighten to 11 ft. lbs. (15 N.m) for all subsequent installations. | ||
| Starting | |||
| Starter | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 100 Ft. lbs. (140 N.m) | ||