Power Lumbar Support System Check
- Push forward lumbar inflator switch to up position. Both lateral (side) bladders should inflate. Lumbar pump will cut out after bladders are fully inflated.
- Push forward lumbar inflator switch to down position. Both lateral (side) bladders should deflate. Lumbar pump will cut out after bladders are fully deflated.
- Push rearward lumbar inflator switch to up position. Lumbar bladder should inflate. Lumbar pump will cut out after bladder is fully inflated.
- Push rearward lumbar inflator switch to down position. Lumbar bladder should deflate. Lumbar pump will cut out after bladder is fully deflated.
- If power lumbar support does not operate at all, go to TEST D: LUMBAR SUPPORT INOPERATIVE under SYSTEM TESTS. If power lumbar/lateral support is inoperative in one function, go to next step.
- If either lumbar or lateral support does not move in or out, go to TEST E: LUMBAR OR LATERAL SUPPORT DOES NOT MOVE IN OR OUT under SYSTEM TESTS.