Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE
1. Relieve the system fuel pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair
2. Drain the fuel tank. Refer to Fuel Tank Draining Procedure. Procedures
3. Remove the fuel tank.
4. Disconnect the fuel tank vapor pressure sensor electrical connector.
5. Remove the fuel tank vapor pressure sensor from modular fuel sender.

INSTALLATION PROCEDURE
1. Reinstall the new fuel tank vapor pressure sensor to modular fuel sender.
2. Connect the fuel tank vapor pressure sensor electrical connector.
3. Reinstall the fuel tank.
4. Refill the tank and reinstall the fuel fill cap.
5. Reinstall the negative battery cable.