System Specifications
NOTE: The content of this article/image reflects the changes called out by TSB: 05-05-23-004.| Front | Normal Thickness | 1.27 in. |
| Minimum Machining | 1.22in. | |
| Discard | 1.21 in. | |
| Runout Limit | 0.003 in. | |
| Parallel Variation | 0.0005 in. | |
| Rear | Normal Thickness | 0.43 in. |
| Minimum Machining | 0.39 in. | |
| Discard | 0.35 in. | |
| Runout Limit | 0.003 in. | |
| Parallel Variation | 0.0005 in. |