Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
Rotate the cruise control release switch counterclockwise until the travel stop has been reached (approximately 60 degrees).

Fig 1: Aligning Cruise Release Switch Until Travel Stop Is Reached
Courtesy of GENERAL MOTORS CORP.
Remove the cruise control release switch from the retainer.

Fig 2: Identifying Cruise Control Release Switch
Courtesy of GENERAL MOTORS CORP.
Disconnect the cruise control release switch electrical connector.