LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1071 (HVAC Systems - Automatic) >> Repair Instructions >> HVAC Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) in Instrument Panel, Gages and Console.
    2. Fig 1: View Of HVAC Control Module Retaining Screws
    GM787165Courtesy of GENERAL MOTORS CORP.
  2. Remove the HVAC control module retaining screws.
  3. Pull the HVAC control module out from the I/P.
    4. Fig 2: Locating Aspirator Hose
    GM787166Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the aspirator hose (1) from the HVAC control module.
  5. Disconnect the electrical connector from the HVAC control module.
  6. Remove the HVAC control module.
scientia non olet · About LEMON Manuals