Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.
Drain the washer solvent from the washer solvent container.

Fig 1: View Of Washer Solvent Container Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the washer solvent container level sensor electrical connector.

Fig 2: Identifying Washer Solvent Container Level Sensor & Seal

Courtesy of GENERAL MOTORS CORP.

Using a small flat-bladed tool, remove the washer solvent container level sensor and seal from the washer solvent container.