Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Catalytic Converter Hanger Bolts

Courtesy of GENERAL MOTORS CORP.

Install the catalytic converter hanger.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the catalytic converter hanger bolts.
Tighten: Tighten the catalytic converter hanger bolts to 45 N.m (33 lb ft).
Install the catalytic converter hanger insulators to the catalytic converter.
Lower the vehicle.