Fuel Level Sensor: Removal
WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Remove fuel sending unit assembly. See FUEL PUMP . Remove the fuel pump and fuel level sensor electrical retaining clip at the top of the fuel sender assembly. Disconnect the fuel pump and fuel level sensor electrical connector.
- Depress the 3 tabs securing upper fuel reservoir and slide upward until free of lower reservoir. Depress the tab on the fuel level sensor while sliding up and out of the housing. Remove the retaining clip from the electrical connector. Remove the fuel level sensor wires from the connector, taking care to note the location of the wires.