LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1298 (Stationary Window System) >> Repair Instructions >> Rear Lift Window Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Remove the rear lift window struts. Refer to Strut Replacement - Rear Lift Window Panel in Body Rear End.
  3. Connect the rear defogger electrical connections.
  4. Connect the OnStar, if equipped.
  5. Fig 1: Antenna Connector To Window
    GM284756Courtesy of GENERAL MOTORS CORP.
  6. Connect the antenna connector to the window.
  7. Remove the protective coverings and tape from the vehicle and the headliner