Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Crossmember Mounting Nuts (Use New Nuts) | 110 N.m | 81 lb ft |
| Lower Control Arm Ball Joint Stud Nut | ||
|
30 N.m | 20 lb ft |
|
180 degrees | |
| Power Steering Gear Mounting Bolts | 100 N.m | 74 lb ft |
| Shock Absorber Lower Mounting Nuts | 28 N.m | 21 lb ft |
| Shock Absorber Upper Mounting Nut | 26 N.m | 19 lb ft |
| Stabilizer Shaft Insulator Clamp Bolts | 58 N.m | 43 lb ft |
| Stabilizer Shaft Link Nuts | 72 N.m | 53 lb ft |
| Transverse Spring Retainer Bolts (Use New Bolts) | 62 N.m | 46 lb ft |
| Upper Control Arm Ball Joint Stud Nut | ||
|
20 N.m | 15 lb ft |
|
250 degrees | |
| Upper Control Arm Mounting Bolts | 65 N.m | 48 lb ft |
| Wheel Hub/Bearing Mounting Bolts | 130 N.m | 96 lb ft |