LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1415 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer solvent level sensor to the washer solvent container, pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
    Fig 1: Connecting Washer Solvent Level Sensor Electrical Connector
    G01587191Courtesy of GENERAL MOTORS CORP.
  4. Install the right front fender liner. Refer to FRONT FENDER LINER REPLACEMENT in Body Front End.
  5. Fill the washer solvent container with washer solvent.
scientia non olet · About LEMON Manuals