Scan Tool Data Definitions

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Accum Fault-Compressor: Defined period of time the compressor is active with out an exhaust cycle.

ALC Compressor Active: Indicates when the compressor is running.

ALC Exhaust Solenoid Active: Indicates when the exhaust solenoid is on.

ALC Relearn: This procedure reprograms the RIM with the ride height specification, per the suspension option.

Battery Low-Compressor: This indicates when there is low voltage at compressor.

Calibration I.D.: This number designates the modules calibration.

Exhaust: Defined period of time that the exhaust is active with out a compressor cycle.

Filtered Position Valve: As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension.

Leveling Sensor Feed: Voltage feed to the suspension position sensor.

Progress Fault-Compressor: Defined period of time the that the compressor is active, and a change is not detected by the sensor.

Progress Fault-Exhaust: Defined period of time that the exhaust is active and no change is detected at the sensor.

Prom I.D.: The modules internal "PROM" identifier.

Suspension Position Sensor: Indicates the sensor signal voltage to the control module.

Trim Value: A value programed in the RIM