LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Anti-Lock Brake System) >> Repair Instructions >> Traction Control Switch Replacement (Traction Control) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the harness connector to the traction control switch.
  2. Install the traction control switch (2) into the Instrument Panel (IP) assembly (3), making sure that all of the switch retaining tabs (1) are engaged.
  3. Install Instrument Panel (IP) bezel. Refer to BEZEL REPLACEMENT - IP CLUSTER in Instrument Panel, Gauges and Console.
    4. Fig 1: Installation Of The Traction Control Switch
    G01664095Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals