Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the blower motor control processor (2) to the HVAC module (1).
- Install the blower motor control processor retaining screws. Tighten the screws to 1.6 N.m (14 lb in).
- Connect the electrical connector (4) to the blower motor control processor (2).
- Connect the electrical connector at the blower motor.
- If equipped, install the sound insulator panel.