LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 659 (Power Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Memory Seat Control Module
    GM381489Courtesy of GENERAL MOTORS CORP.
  1. Slide the module in until seated.
    2. Fig 2: Harness Connectors & Memory Module Retaining Screws
    GM378544Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the memory module retaining screws (1).

    Tighten:  Tighten the screws to 3 N.m (26 lb in).

  3. Connect the harness connectors (2).
  4. Install the seat cushion. Refer to Seat Cushion Frame Replacement - Front .
  5. Install the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  6. If you installed a new memory seat, calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals