Installation Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Important: Do not tip the battery more than 40 degrees during battery installation.
- Install the battery to the battery tray.CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the battery hold down retainer.
Tighten
Tighten bolt to 18 N.m (13 lb ft).
- Connect the positive battery cable.
Tighten
Tighten the positive battery cable bolt (1 ) to 15 N.m (11 lb ft).
- Connect the negative battery cable (2 ). Refer to Battery Negative Cable Disconnect/Connect Procedure .