EGR Valve Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the plug hole plate.
Remove the battery cover.
Disconnect the negative battery cable.
Disconnect the EGR valve connector.
Remove in the order indicated in the table.

Fig 1: EGR Valve With Torque Specifications
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removal Order Of EGR Valve Table
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.