Continuity Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the CPP switch.
Verify that the continuity between CPP switch terminals A and B is as indicated in the table.
- If there is no malfunction, perform the Circuit Open/Short Inspection .
- If there is any malfunction, replace the CPP switch.
Fig 1: Clutch Pedal Position Switch Inspection Continuity Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Clutch Pedal Position Switch & Terminals
Courtesy of MAZDA MOTORS CORP.