LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 748 (HVAC System) >> Refrigerant System >> Refrigerant Charging >> Leak Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Leak Test

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect for leakage using the a gas leak tester.
    • If there is no leakage, go to Step  3.
    • If leakage is found at a loose joint, tighten the joint, then go to the next step.
  2. Inspect for leakage again.
    • If there is no leakage after tightening the joint, go to the next step.
    • If there is still leakage at the same joint, discharge the refrigerant and then repair the joint. Repeat the charging procedure from evacuation.
  3. Disconnect the manifold gauge from the charging valves.
  4. Install the caps to the charging valves.
    Fig 1: Installing Caps To Charging Valves
    G00975538Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals