LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 832 (Transfer Case - STEYR) >> Repair Instructions >> Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the O-ring to the speed sensor, if removed.
  2. Install the speed sensor (1) to the transfer case.
    Fig 1: Installing Speed Sensor To Transfer Case
    G01499954Courtesy of GENERAL MOTORS CORP.
  3. Position the pinion housing vent hose (2) and mounting bracket to the speed sensor bolt boss.
    Fig 2: Pinion Housing Vent Hose & Mounting Bracket To Speed Sensor Bolt Boss
    G01499955Courtesy of GENERAL MOTORS CORP.
  4. Install the speed sensor bolt (3) to the transfer case.

    Tighten 

    Tighten the bolt to 30 N.m (22 lb ft).

  5. Connect the electrical connector to the speed sensor.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals