Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Apply rust inhibitor to the plate and the body mating surfaces ANTI-CORROSION TREATMENT AND REPAIR .
- Install the retaining plate to the body with rivets using the J 34940.
- Install the lower rocker molding. Refer to MOLDING REPLACEMENT - ROCKER PANEL (XTREME) or MOLDING REPLACEMENT - ROCKER PANEL (BLAZER) or MOLDING REPLACEMENT - ROCKER PANEL (JIMMY)
- Install the front fender lower cladding.
- Lower the vehicle.