LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 904 (Exterior Trim) >> Repair Instructions >> Retaining Plate Replacement -Rocker Panel (Xtreme) >> Tools Required >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply rust inhibitor to the plate and body mating surfaces.
  2. Install 1/4 inch rivets using the J 34940. 
  3. Install the rocker molding.
  4. Lower the vehicle.
    Fig 1: Rocker Molding
    G01477385Courtesy of GENERAL MOTORS CORP.