Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window switch from the trim panel by using a flat-bladed tool in order to pry upward on the leading edge.

Fig 1: Removing Power Window Switch From Trim Panel
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connector from the switch.
Use a small screwdriver in order to press in the retainer springs.

Fig 2: Disconnecting Electrical Connector From Switch
Courtesy of GENERAL MOTORS CORP.