LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 908 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Run Channel Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to the appropriate procedure
  2. Remove the water deflector. Refer to WATER DEFLECTOR REPLACEMENT - DOOR .
  3. Remove the bolts that retain the front run channel to the door.
  4. Carefully pull the front run channel in order to disengage the run channel from the window weatherstrip.
  5. Remove the front run channel from the door.
  6. Slide the window forward.
  7. Remove the bolts that retain the rear run channel to the door.
  8. Carefully pull the front run channel in order to disengage the run channel from the window weatherstrip.
  9. Remove the rear run channel from the door.
    Fig 1: Removing Rear Run Channel From Door
    G01477788Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals