Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the assist handle to the vehicle.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.<
- Install the screws that retain the assist handle to the vehicle.
Tighten
Tighten the screws to 9 N.m (80 Ib in).
- Install the assist handle covers. Position the covers and snap into place.