LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 919 (Stationary Window System) >> Repair Instructions >> Windshield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Install the window side reveal moldings to the vehicle.
    3. Fig 1: Installing Window Side Reveal Molding
    GM398501Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the left and the right sides of the window side reveal moldings.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    4. Fig 2: Installing Window Side Reveal Molding Screws
    GM398502Courtesy of GENERAL MOTORS CORP.
  4. Install the front door sealing weatherstrips (1) to the retainer (2).
    5. Fig 3: View Of Front Door Sealing Weatherstrip
    GM441415Courtesy of GENERAL MOTORS CORP.
  5. Install the cowl air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Install the window wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
  7. Install the antenna mast, if equipped. Refer to Fixed Antenna Replacement in Entertainment.
  8. Install the rearview mirror. Refer to Rearview Mirror Replacement .
  9. Close the hood.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals