LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
  2. Remove the left center pillar assist handle. Refer to Assist Handle Replacement - Rear in Interior Trim.
  3. Remove the left center pillar garnish molding. Refer to Garnish Molding Replacement - Center Pillar in Interior Trim.
  4. Remove the left sunshade. Refer to Sunshade Replacement in Interior Trim.
  5. Gently pull down the headliner.
    6. Fig 1: Disconnecting Inside Air Temperature Sensor Connector From The Inside Air Temperature Sensor
    GM675996Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the inside air temperature sensor.
  7. Partially remove the inside air temperature sensor from the headliner.
  8. Remove the sensor grille from the inside air temperature sensor.
    9. Fig 2: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  9. Remove the inside air temperature sensor from the headliner.
scientia non olet · About LEMON Manuals