Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the spare tire from the vehicle to gain access to the control module.
- Disconnect the electrical connectors from the control module.
- Remove the bolts (1) retaining the control module (2) to the bracket.
- Remove the control module from the vehicle.
NOTE:
Refer to Rear Wheel Steering Lifting and Jacking Notice in Cautions and Notices.