Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the shield to the vehicle. 15 Series is shown, 25 Series is similar.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the shield to frame bolts.
Tighten: Tighten the bolts to 20 N.m (15 lb ft).

Fig 1: View Of Engine Protection Shield

Courtesy of GENERAL MOTORS CORP.