LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1217 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the license lamp bulb to the license lamp socket, if removed.
  2. Install the license lamp socket to the license lamp housing, then rotate clockwise to secure.
  3. Position the license lamp to the rear bumper fascia.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the license lamp screws to the license lamp.

    Tighten 

    Tighten the license lamp screws to 2 N.m (18 lb in).

    Fig 1: Installing License Lamp
    G01503286Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals