LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1512 (Engine Cooling System) >> Repair Instructions >> Fan Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cooling fan.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

    Important:  Turn the cooling fan nut counterclockwise to tighten.

  2. Install the cooling fan nut.

    Tighten 

    Tighten the nut to 6 N.m (53 lb. in).

  3. Install the cooling fans with the cooling fan shroud. Refer to COOLING FAN REPLACEMENT - ELECTRIC  .
Fig 1: Installing Cooling Fan
G01500952Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals