Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the switch to the switch panel sliding the front tabs in first. Rock the switch down in order to seat the switch completely.
- Install the screws to the window switch. Tighten the window switch screws to 2 N.m (18 lb in).
- Connect the electrical connector to the window switch.
- Install the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .