LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 697 (Door System, Mirror System & Window System) >> Repair Instructions >> Module Replacement - Front Power Window >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Power Window Module
    GM348453Courtesy of GENERAL MOTORS CORP.
  1. Position the regulator to the inside door structure. A slight twisting motion of the regulator is needed.
  2. Ensure the regulator is positioned firmly in the door.
  3. NOTE: Refer to FASTENER NOTICE .
    IMPORTANT: Place Permatex Threadlocker, Part Number 24200, GM P/N 12345382, onto the regulator bolt threads prior to tightening.
  4. Install the bolts to the window regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  5. Align the window glass to the regulator.
  6. Install the bolts that hold the window to the regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  7. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  8. Install the trim panel. Refer to Trim Panel Replacement - Side Front Door .
  9. Lower the window and inspect the operation.