Ignition Coil: Service and Repair

IGNITION COIL(S) REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the spark plug wires. Note the position from which the wires are removed.
2. Remove the 2 screws securing the ignition coil to the Ignition Control Module (ICM).
3. Remove the ignition coil.

INSTALLATION PROCEDURE




1. Install the ignition coil.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Reinstall the 2 attaching screws.

Tighten
Tighten the screws to 4.5 N.m (40 lb in).

3. Reconnect the spark plug wires.