LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Firebird Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Computer Relearn Procedures) >> Relearn Procedures (Cars) >> Cavalier & SUNFIRE >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming

WARNING: This page does not describe the selected car, but rather 67 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
  1. If Powertrain Control Module (PCM) was replaced, the EEPROM in the PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in the PCM or PCM may be damaged. Perform EEPROM programming using the Techline equipment manufacturer's instructions and latest software applicable for the vehicle model.
  2. Once EEPROM is reprogrammed, the Crankshaft Position (CKP) sensor variation learn procedure must be performed using proper procedure. See CRANKSHAFT POSITION (CKP) SENSOR VARIATION LEARN PROCEDURE.
NOTE: Password must be learned when Passlock(TM) sensor, BCM or PCM is replaced. BCM must be programmed with proper RPO configurations before performing relearn procedures. If PCM is replaced, after programming, PCM will immediately learn the first password it receives. If password needs to be changed, learn procedure will need to be performed.
scientia non olet · About LEMON Manuals